Options      Specifications      Spindle Configuration

ULTRA      GNS-623

This is an excellent machine for the middle range cabinet">

Options      Specifications      Spindle Configuration
ULTRA      GNS-623
This is an excellent machine for the middle range cabinet, mouldings, and flooring industry.
Centralized Pressure Regulators All pressure regulators for the entire pneumatic system are located at the front right section of the machine for operator convenience Sectional pressure adjustments to all overhead feed rollers ensure desired pressure settings.     Powered In-Feed Table Roller Allows positive traction especially for hard to feed materials.       Vertical Spindle Adjustment up to 60 MM Allows two or more setups on the vertical spindle saving time on the tool changes.  The 60mm adjustment is ideal for utilizing the full 60mm length of a planing head.     Side Front Pressure Plate on Left Vertical Spindle Fully eliminates unsmooth problems when feeding short or narrow stock.  The pressure plate is easy to adjust.       Centralized Lubrication All necessary adjustments and slides throughout the machine are lubricated from a centralized location.       Separate Motor and Spindle Separate mounting of motor and spindle eliminates spindle vibration.  Fitted with a high speed belt for power transmission, this configuration enables a smooth moulding effect and close tolerance result while in heavy cutting.       Universal Spindle(Optional) This spindle can be tilted for complicated cutting jobs.       Digital Spindle Positioning Controller Available to equip for controlling any spindle as requested. The digital positioning controller permits fast, convenient and high accuracy spindle positioning.       Feed Magazine Provides constant feeding with no gaps particularly with short stock.  Thus increasing the rate of production and is also a good safety feature particularly on very short pieces.     Double Hold Down Pressures Double hold down pressures can be added with the following movements of x, y & z giving independent pressure to the uneven materials such as crown moulding, chair rail, etc. While also, giving firm overhead support on the complete width of the material.
Specifications Working Width 10-230mm / 5/8-9" Working Height 7-160mm / 3/8-6" Number of Spindles 4-7 Motor Capacity per Spindle 7.5, 10 HP Motor Capacity of Feed 5 HP Spindle Speed 6000 RPM Spindle Diameter 40mm / 1 13/16" Tool Cutting Circle, First Bottom Spindle 125-160mm Tool Cutting Circle, Vertical Spindles, Left 100-200mm Tool Cutting Circle, Vertical Spindles, Right 100-200mm Tool Cutting Circle, Horizontal Spindles, top 100-200mm Tool Cutting Circle, Horizontal Spindles, Bottom 100-200mm Feed Speed 6-30 m/min / 20-95 f/min Pneumatic Pressure for feed rollers 6 bar / 80 psi Adjustment range for infeed table and edge-jointing fence 12mm Adjustment range for vertical spindles (axial) 80mm Adjustment range for horizontal spindles (axial) 40mm Length of Straightening Table 1800 mm Mechanical digital readouts for the pressure shoes and hold-down unit Full Sound and Safety Enclosure Motorized vertical adjustment feed Lateral pressure roller opposite first right spindle Chainless cardan feed sustem	Optional Equipment Universal Spindle Program system provides faster setting width and thickness Groove guide for short, twisted and untrimmed material Setting and measuring devices Length of feed table up to 3 meters Increased horsepower Electric timer for lubrication of feed table