ULTRA OPTI 10-25
Ideally suited for the small to medium
woodworking shop. Includes 16' in feed capacity . It comes standard
with these features: Will optimize random lengths up to 16', Can
remove defects marked by a fluorescent crayon, cut stock lengths to
desired length. This machine is under power and ready for any
demonstration in Randleman, NC
|
|
This mode is set for
single size cutting. Key in the desired size from the cutting length
or choose a size from the 50 presets of memory. |
|
|
Optimizing from Unknown Lengths This mode will cut any
length up to 16' . It will cut suitable lengths from
varying sizes. If the quantity of one size is reached it will then
select other sizes. The program will show the remaining lengths
required automatically. |
|
|
Optimizing from Known Length This mode will cut
multiple quantities from stock lengths. Key in the desired material
length and the pusher will move to the same length board each time.
The auto cutting cycle has 1-50 sets of memory. |
|
Defecting Mode A fluorescent crayon is used to mark and remove the
defects. |
|
|
|
Programmable screen Easy to use touch interface. Programs very quickly for ease of use. |
|
|
Material Pusher Programmable controlled pushing device driven by servomotor. Fixed position: program in the size and the pusher will automatically move to the correct position ready for use. Operating Pusher: Key in all required sizes; when one size is finished. The pusher will continue running until all the programmed sizes are finished |
Cutting Width |
|
